Power and cables rental

What matters when renting power and cables?

Batteries

A separate battery extends or supports the use of suitable equipment. The correct series and connection are decisive; appearance or capacity alone is not enough.

Check if you need a replacement battery or an extension battery. Note the exact device or device to which the battery is used and plan a suitable charger when needed.

Check the charge before use and protect the connections during transport. Change or connect the battery according to the instructions of the associated system.

Audio cables

An audio cable connects a source and an input, but does not automatically change the type of signal. Plug form, channel layout and signal level must be consistent.

Check both ends of the connection. A headphone output, microphone signal and speaker output have a different function, even if a similar jack plug is used somewhere.

Measure the cable route including bends and workspace at the equipment. Connect with the levels low and test each channel. Lay loops outside the walkway.

Video cables

A video connection must retain the desired image signal throughout the route. For longer distances, resolution, cable version and any inverters count.

Note source, screen or projector and desired image format. An adapter, splitter and extension set have different tasks and are not the same.

Test the complete connection to the real devices. Protect connections from tensile force and avoid sharp nodding. Use the prescribed power supply when connected.

Solar panels

A mobile solar panel can recharge a suitable power station during use or in between. The yield changes with sun, shade, angle and temperature.

Check the power station input requirements and the correct connection. An equal watt number alone does not prove that panel and charge input can be used together.

Set the panel stable and as far as possible free from shadow. Make sure that the charging connection is active on the go and do not adjust the energy planning solely to the maximum panel value.

Power stations

A power station delivers stored energy to a mobile setup. The battery capacity in Wh and the permitted output power in W describe two different properties.

Add the actual consumption of the devices and record how long they are on at the same time. Take into account conversion loss and equipment that requires more power when switched on.

Check the charge and necessary connections in advance. Set the unit dry and ventilated. Test the whole combination before you leave for a place without a socket.

Power cables

A power cable or distribution point makes the power supply at the place of use accessible. The load of the connected equipment and the type of connection must fit the design.

Add the devices that are connected simultaneously. A divider does not make any additional power available on the existing group. Also check the conditions when outdoors are used.

Place the route outside passageways and protect connections appropriate to the location. Follow the instructions for loading and rolling off with reels. Let an unclear connection be assessed.

Network connections

A network switch divides a wired network connection between appropriate devices. With DJ devices, a suitable connection component can be connected according to their supported link function.

Check the network function of all connected models and the required number of ports. A switch does not add an Internet subscription or wireless network in itself.

Test the entire network before the set and lay cables identifiable. Keep power and data connections accessible for a targeted control.

Compare the actual version

EcoFlow DELTA Pro + extra battery x2 10800wh lists brand: EcoFlow; battery capacity: 10800 Wh. Check this against your source equipment, venue and programme.

XLR cable 50 meters lists length: 50 m. Check this against your source equipment, venue and programme.

Tulip (RCA) cable - 6 meters lists length: 6 m. Check this against your source equipment, venue and programme.

Tulip to mini jack 3.5mm cable USB-C adapter set lists connection: Tulip to mini jack 3.5mm. Check this against your source equipment, venue and programme.

Booking, collection and delivery

Choose rental dates that allow for setup and return. Pricing and deposits apply to the selected version. Collection and return at Theemsweg 40 in Amsterdam Sloterdijk are free by appointment. Arrange delivery, collection and installation separately; a quote or PDF does not reserve equipment. Booking is handled by Speaker Verhuur Amsterdam.

Ask for advice about this category